- Products
- FDM gait analysis platform
FDM gait analysis platform
Zebris analysis platform for posture, unwinding and balance, measuring the distribution of plantar pressures - FDM model
Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days
FDM gait analysis platform
Dimensions
FDM SX: 55 cm (21,6") x 40 cm (15,7") x 2,1 cm (0,8")
FDM-S: 69 cm (27,1") x 40 cm (15,7") x 2,1 cm (0,8")
FDM 1.5: 158 cm (62,2") x 60,5 cm (23,8") x 2,1 cm (0,8")
FDM 2.0: 212,2 cm (83,5") x 60,5 cm (23,8") x 2,1 cm (0,8")
Resolution: 0,83 cm (0,33")
Number of pressure sensors
FDM-SX: 1920
FDM-S: 2560
FDM 1.5: 11264
FDM 2.0: 15360
Capture area
FDM-SX: 40 cm (15,7") X 33 cm (13")
FDM-S: 54 cm (21,2") X 33 cm (13")
FDM 1.5: 144 cm (56,6") X 56 cm (22")
FDM 2.0: 203 cm (80") X 56 cm (22")
Including software for data collection and analysis
Create values by offering a better view
Join us and move on to modern and effective treatment. Ask for a demonstration.
Analyse simple et précise de l'équilibre et de la marche
Le nouveau système de mesure Zebris FDM fonctionne en utilisant des capteurs de force capacitifs de très haute qualité qui sont
arrangés en forme de matrice composée de capteurs de 0,8 cm2. Chaque capteur produit sa propre courbe d'étalonnage. Les plateaux
de mesure permettent l’analyse de la distribution statique et dynamique des forces sous chaque pied lors d’un maintien debout
ou d’une marche. Avec toutes les options disponibles, le système FDM peut être étendu pour correspondre à votre demande.
En supplément à cette analyse de la marche, l’analyse des distributions de forces en statique permet la visualisation de la posture statique pendant un examen habituel. Lors de l’enregistrement, les répartitions gauche/droite et avant/arrière sont visualisées en diagramme de barres (%) mais aussi numériques (Newtons). Les mesures sont ensuite normalisées et ajoutées à l’analyse du centre de pression dans le rapport.
Les principaux paramètres spatio-temporels de la marche sont visibles dans le rapport d’évaluation, incluant :
la longueur du cycle, du pas, les phases de support/d’oscillation et de double support, la cadence et l’angulation du pied.
La variabilité de la vitesse de marche est calculée comme une mesure de l’instabilité posturale.
Le système Zebris FDM
The most suitable choice you can make:
Suitable for analysis of posture, roll-off and gait
Robust pressure distribution measurement technology
Individually calibrated capacitive sensors
Four (4) different sizes: FDM SX, S or FDM 1.5 and 2
Different measurement solutions and speed, depending on the number of sensors
Intuitive modular FDM software suite with robust valuation report
Can optionally be combined with video and EMG
Optional module available for posture analysis
Can be combined with Zebris SyncLight Cam for synchronous video recording
The zebris FDM system is fully equipped to analyze gait patterns of various individuals in order to quantify and diagnose abnormalities in gait cycles. Using high-quality plates with capacitive force sensors, the FDM system measures the weight distribution on each foot, making the appearance of gait compensations, overpronations and supinations easily discernible to the operator.
While the system itself is controlled by computer (via USB), the measurements of the FDM system are conveniently analyzed with the supplied WinFDM software, which can visually display the subject's walking patterns, as well as provide a detailed reading of the subject. gait cycle, as well as static and dynamic force distributions, all of which can be printed instantly.
A range of different platform sizes are available to allow for different measurement configurations.
For clinical applications
In a clinical setting, the FDM system can be used to easily identify a range of gait compensations, by analyzing dynamic force distribution readings from WinFDM software. Accompanied by the optional video module, the walk can also be played back to the operator and the patient concerned, in slow motion if necessary. This information can then be used to help form the basis of intervention strategies, which can then be used for patient rehabilitation. With this application in mind, the FDM system is also fully compatible with patients using walking aids.
For research applications
In a research context, the FDM system can be used to compare and contrast a range of gaits in order to analyze different experimental conditions compared to a control. Up to three measurements can be directly compared to each other using the WinFDM software. The measurement cycle can also be repeated up to four times to obtain the average of the results. The measurement sequences can be viewed using the “Viewer” of the supplied software, and the “Report” function creates instant printable feedback on the conditions tested.
The FDM plantar pressure distribution measurement system
For years, zebris FDM has successfully supported doctors and therapists in the diagnosis of postural deformities as well as podiatrists in the supply of insoles. The proven zebris FDM pressure distribution measuring system captures static and dynamic pressure distribution while standing and walking quickly and easily.
The zebris FDM system analyzes stationary and dynamic gait patterns using sophisticated high-quality plates and accompanying easy-to-use analysis software. Ideal for use in clinical settings as a diagnostic tool and as a biometric tool in research.
Qualité d'image supérieure
Le nouveau système de mesure Zebris FDM fonctionne en utilisant des capteurs de force capacitifs de très haute qualité qui sont arrangés en forme de matrice composée de capteurs de 0,8 cm2 (0,12") . Chaque capteur produit sa propre courbe d'étalonnage. Les plateaux de mesure permettent l’analyse de la distribution statique et dynamique des forces sous chaque pied lors d’un maintien debout ou d’une marche.
Clinique et recherche
Le système zebris FDM est idéal pour les environnements cliniques et de recherche, car les 11 000 capteurs offrent une vue complète de la distribution de la force statique et dynamique.
Versatilité
Une gamme de différentes tailles de plate-forme est disponible pour permettre différentes configurations de mesure. Une gamme d'accessoires est également disponible afin de répondre aux besoins analytiques, dont un EMG de télémétrie (pour enregistrer les angles des joints), et un module vidéo en option.